Top Tips for Opening a Wine Bottle

Expert advice on how to deal with different types of bottles, corks, other closures and corkscrews
Top Tips for Opening a Wine Bottle
iStock Cut off the top part of the capsule before inserting the corkscrew near the center of the cork.
Mar 22, 2019

Ever been stymied by an unfamiliar wine closure or unusual bottle, puzzled over serving etiquette or wondered why there are so many different types of corkscrews? Here are some tips for opening any bottle with ease and grace, or dealing with a cork that’s gone awry.

Pulling a Cork

Most wines are finished with a cork of some type—all-natural cork, composite cork or synthetic—covered by a capsule of either metal or plastic. To open:

  • Remove the top part of the capsule, cutting around the neck just below the lip of the bottle.
  • Wipe the top of the bottle with a damp towel or cloth if necessary.
  • Use a corkscrew to remove the cork. There are several different models of corkscrew available (more on those later); the choice is a matter of individual taste.
  • Pour a small taste and check that the wine is in good condition—musty, moldy aromas are a sign of TCA, while notes of old, browned apples indicate the wine may be oxidized—before serving to guests.

Removing the top of the capsule makes it easier to remove the cork, reduces the chances of a weak cork breaking in the bottle and keeps sharp edges away from the bottle opening. It also gives you a clue if any liquid has seeped past the cork, from the wine having been exposed to high temperatures. Formal wine service calls for the server to just cut below the lip to preserve the packaging for presentation, but in the privacy of your own home, you can feel free to remove the whole capsule if you prefer. Some wineries have replaced capsule with thin, transparent cellophane intended to be removed or dispensed with the capsule altogether in an effort to reduce packaging; the cork may also be topped with a bit of wax that can be flicked off by slipping a blade under it.

You don’t have to smell the cork once it’s removed. Some believe it provides information about whether a wine is off; if a natural or composite cork smells bad, that may indicate the wine is flawed, but some corks can smell fine even when the wine isn’t showing well, and vice versa. You can visually inspect the cork to see if it’s dry or damaged, or if wine has leaked to the top—warning signs that the wine is oxidized or cooked—but tasting the wine will verify that. If you purchased a rare collectible wine, inspecting the cork for the stamp of the winery can help verify authenticity.

Handling Alternative Closures

Screwcap closures have become popular as a way to eliminate the problem of TCA taint that is sometimes caused by corks. You'll find twist-offs most commonly on white wines where preserving the freshness is a key consideration, but they are also becoming increasingly common on high-end reds worth aging. As for opening them, an enthusiastic twist and a "Boy, that was easy!" will probably do. Grab the cap firmly with one hand and twist the bottle with the other to loosen the seal—the "crack" noise it makes is the closest you can get to a cork’s pop. (To add flair, some servers twist off the cap by rolling it down their forearm—mighty impressive.)

Glass toppers—an elegant stopper that resembles a simple T-shaped decanter top—are another alternative to corks and can be found on wines from all over. If you come across a glass topper, you might not know it at first, as they lie underneath the bottle’s foil capsule. No special opener is needed, just flick it off.

You can also find good-quality wines these days in the bag-in-a-box (or cylinder) format, lightweight Tetra Pak cartons, cans and other types of containers. Their closures or dispensers may vary and should be fairly self-explanatory.

Popping Open the Bubbly

Champagne and sparkling wines have a different type of cork closure—no corkscrew needed here—and must be handled carefully since the contents are under pressure and a flying cork could cause injury. Don’t open a bottle right after transporting it home, and make sure the wine is well-chilled before opening, so the bubbles don’t froth out the top.

  • Remove the foil.
  • Make sure the bottle is pointing away from anyone or anything breakable.
  • Place a thumb over the metal crown to prevent the cork from ejecting and loosen the wire fastener with the other hand.
  • Without removing the wire, keep one hand on top of the cork. Grip the bottle firmly about two-thirds of the way down with the other hand.
  • Turn the bottle, slowly releasing the cork. Aim for a gentle sigh, not a loud pop.
  • To avoid overflowing the glass, pour a little wine, wait a few seconds for the froth to settle, then continue pouring; aim for about two-thirds full.

Choosing a Wine Opener

Assuming that not every wine you buy comes topped with a twist-off or packaged in a carton, you’re going to need a corkscrew at some point. (Yes, you can find videos online with instructions for opening a wine bottle with your shoe, but that should only be an act of true desperation.)

One of the most versatile and portable is the waiter’s corkscrew, a compact hinged opener with a spiral corkscrew “worm” on one end and a lever on the other; these range from basic models under $15 to luxury-brand versions with ivory handles and forged blades. Models with hinged levers come in handy for extracting extra-long corks. Also popular are the powerful lever models that reduce the effort of pulling and make it easier to open a lot of bottles in one night. There are even electric wine openers that do the same.

Look for an opener with a thin screw, or “worm,” which will be gentler on potentially crumbly corks than a thick one. And get one with a foil cutter—whether it’s a blade attached to the corkscrew or an accompanying easy grip-and-squeeze accessory you place over the top of the bottle. If you’re choosing a blade, a serrated one tends to be less likely to slip than a non-serrated one and should also minimize any tearing of the foil.

Whatever your preference, it’s always good to have one or two backup openers on hand to deal with the problem corks.

Dealing with Special Cases: Large Bottles, Tricky Corks and Wax Tops

Crumbling or fragile cork: Rather than forcibly drive a corkscrew into its center, you can use a two-pronged wine opener, known as an Ah-So. Start with the longer prong and slowly slide the prongs into the tight space between the cork and the bottle. Rock it back and forth until the top of the Ah-So is resting on the top of the cork. Then twist the cork while gently pulling it up. It might feel a bit awkward, and it takes a couple of minutes, but it keeps the cork in one piece.

Large-format bottles: Larger-than-standard bottle sizes, which tend to have corks that are bigger in diameter, can be more difficult to handle and, as these bottles are less likely to be stored on their sides, the corks may be prone to drying out—and breaking. Use as long a corkscrew as is available, preferably one with five "twists," and insert as you would a normal bottle. Once the cork is about halfway extracted, twist the corkscrew further in as far as possible, to the "hilt," and pull it the rest of the way out. If it breaks, re-insert it at a 45-degree angle and continue to pull it out.

Broken cork: If a cork breaks apart as you’re pulling it, you might want to reach for a waiter’s corkscrew, as you can reinsert the worm at a 45-degree angle into the remaining cork piece and then slowly work it out.

Loose cork: If the cork is moving around the neck of the bottle, other types of openers may push it down into the wine. A waiter’s corkscrew inserted at an angle can give you more control over it.

Wax seal over cork: Some wine-opener kits come with special stainless-steel wax removers. But if you’re struggling to cut or chip away at the wax, you can always just stick your corkscrew through the wax and pretend it’s not there. First, use a waiter’s corkscrew (not an Ah-So or lever-pull style), preferably one that isn’t coated with Teflon, on which the wax will do a real number. Estimate where the center of the cork is, put in your corkscrew, and before you make the final tug to get the cork out, brush off any stray bits of wax so they don’t fall into the bottle.

More How to Serve Wine 101

See More

How to Choose the Right Wine Glass

Mar 29, 2019

Decanting 101

Mar 26, 2019

3 Tips to Achieve the Perfect Serving Temperature

Mar 25, 2019

Serving Wine How to Serve Wine 101 How To

You Might Also Like

How to Start a Cellar: Buying Strategies

How to Start a Cellar: Buying Strategies

On the path to wine collecting, four distinct approaches help map the journey to your ideal …

Jul 31, 2017
How To Start a Cellar

How To Start a Cellar

Jul 31, 2017
10 Tips for Attending a Wine Tasting

10 Tips for Attending a Wine Tasting

How to make the most of any walk-around event where you can sample dozens (or hundreds!) of …

Mar 28, 2019
Collecting 101: How to Move Your Wine Collection

Collecting 101: How to Move Your Wine Collection

Tips on getting your wine collection from here to there

Apr 27, 2016
Cellars 101: How to Sell Your Wine at Auction

Cellars 101: How to Sell Your Wine at Auction

Insider tips for getting the best deal when you put your wine on the block

Sep 25, 2017
Cellars 101: How to Buy Wine at Auction—Factoring in the Extra Costs

Cellars 101: How to Buy Wine at Auction—Factoring in the Extra Costs

Insider tips to help you plan your spending before the gavel comes down

Sep 26, 2017
WineRatings+

WineRatings+

Xvalues

Xvalues

Restaurant Search

Restaurant Search